Use Directions:

Keep away from children and use ONLY with candle wax melts (don’t use liquid oils).

DO NOT touch while light is on. Turn off and allow warmer to cool down before unplugging, replacing bulb and before cleaning.

  1. Plug (make sure the jack is sturdy and push all the way in)

  2. Place the wax cube on it

  3. Turn on the switch

  4. Let it evaporate and enjoy!

Please note that the plug can be rotated to fit vertical and horizontal outlets. To rotate, gently pull out and twist (follow the arrows).

The warmer uses a 15-watt NP7 Candle Warmers Etc. bulb available here.

Safety Instructions:

To reduce the risk of fire, electric shock and excessive UV radiation, follow these directions for use:

  • Read all instructions, including these important safeguards below

  • Use caution when handling - the ceramic body may become very hot. Do not place the warmer on or near sensitive or flammable surface.

  • Do not place near the stove, the oven, a hot gas or electric burner.

  • Turn off and unplug the warmer when not in use or before cleaning.

  • There is a risk of electrical shock.

  • Do not put anywhere near water to avoid electric shock.

  • This product is NOT A TOY and is for adult use only.

  • Do not leave unattended when children are around.

  • Keep out of reach of children. Hot wax may cause serious injury. Do not add water to hot wax.

  • Do not operate if the warmer is not working properly or when it has been damaged in any matter.

  • Do not attempt to repair this appliance yourself. Service should only be performed by an authorized service representative.

  • Do not attempt to move the warmer with hot wax in it.

  • Wait for ceramic body to cool down before disconnecting. To disconnect, grip plug and pull from outlet.

  • Never use an extension. Do not alter the plug.

  • Do not use outdoors.

  • Do not use in small, confined pet areas without adequate ventilation.

  • Do not obstruct airflow.

  • Keep away from furniture, fabrics, bedding, and other materials that might present a fire hazard.

  • Do not place open wax melt refills on finished surfaces.

  • Use in a properly functioning 120-volt electrical outlet only.

  • The warmer gets HOT, do not touch while light is on.

  • Use only scented wax that is designed to be melted with an electric warmer. Do not warm fragrance oils in this device.

  • This appliance is designed exclusively for simmering scented wax and is not intended to be used for food, drinks, or dining services.

  • Always allow ceramic body to cool down before touching. Do not move warmer when supporting container of hot wax.

  • Turn off, unplug and allow warmer to cool down before replacing bulb and before cleaning.

  • Do not expose skin to light for long periods of time.

  • Do not look directly at lighted bulb.

  • Do not operate the warmer if you have missing parts.

  • EYE IRRITANT: if warm wax makes contact with eyes, flush with water for 20 minutes and consult a physician if irritation persist.

  • Use a 15-watt NP7 Candle Warmers Etc. bulb available here.